Suitcase Workshop
- Electronics
- Buidings
42deep x 35 wide x 27 tall
42cm deep x 17cm wide
Introduction
Design
Eye Level Shelf to study work as it progresses - GW
Alex - max depth 700mm, depth of lower shelf (for vice at least 11cm), what's the depth of the
(So it is on the outside) The box measures 80cm x 60cm with 10cm background ... more 2 doors 5cm deep and a worktop 80cm x 60cm, which I think is enough to mount figures and make dioramas ... fluorescents
Measurements as I say are 80cmx60cm and 10cm in the background plus 1cm from the rear panel. And the doors are 40cmx60cm with 5cm of background plus 1cm of the panel and the table is about 58cm by 80cm. In total has 18cm closed bottom
To leave a hole for the table panel and the doors mount the panel, and then the doors separating the hinges so that everything is adjusted.
The assembly is with white glue and nails, and each one of the parts carries a shelf of reinforcement also of 1cm to give him rigidity. The rest of the shelves and panels are made with 0.5cm plywood to save weight and glue with white glue.
The fluorescent ones are 8W those of the doors and 13W the central one, and all wiring with finer cable and welded to the inside of the strip to save the plugs and that they would be free for other tools (sold them in Leroy and in some Chinese .. .). The power strip turns on all the fluorescents, although each one has its on and off switch to play with the illumination.
The tools are fastened with wall hangers and screws, and small paints and tools with elastic bands with screws ...
Behind the main fluorescent, there is a gray Ikea blind, which I use for the back that is made of matt plastic (they are the ones that remove all the sunlight), which serves as a photographic background and which I now explain to you ... ( I have another one of clear color to change it in case it needs ...)
Let's go with the photography function ....
As I said before, behind the main fluorescent, there is a gray Ikea blind, to deploy it only have to remove the central panel, hair dryer and dremel,
Alex's Design
Roughly 80cm wide, 60 cm tall, but worktop is only 50cm deep
Large items to consider:
- Drill
- Soldering Iron Base Station
- Rivetter
Lighting
Culina Legare 30cm Cool White LED Strip Linklight x 2
Culina Legare 50cm Cool White LED Strip Linklight
Loose Large Items
- Vice
- Soldering Irons
- Drill
- 120mm Drill Press
Holders:
- Pliers & Cutters
- Files
- Tweezers
- Knives
- Screwdrivers
- Glues
- Clamps
| Magnification | ||||||
|---|---|---|---|---|---|---|
| Watchmakers Loupe | 4" Focus |  |
COG | MB | ||
| Measuring & Marking | ||||||
| Steel Rule mm / fractions of inch | 6" | Rabone 64R 0-35-400 |  |
AW, GW, IR, MB | ||
| 12" | Rabone 64R 0-35-401 | |
AW, GW | |||
| Spring Dividers | 75- 150mm / 3" | Starrett 277-3 | |
AW, GW, IR | ||
| Digital Vernier Caliper / Slide Gauge | 100mm | - | |
AW, GW, IR | ||
| Micrometer | 0 - 25mm | |
||||
| Engineers Square | 3" | - | |
MB, GW | ||
| 4" | - | |
MB | |||
| Engineer's Scriber | Eclipse No. 227 | |
AW, GW, IR, MB | |||
| Starrett 70A | |
|||||
| Pencil | 3H | |
MB | |||
| Sharpie Pen (Blue / Black) | |
GW | ||||
| Cutting Out & Fitting | ||||||
| Scissors | Fiskars Micro Tip Big Loop (111080) | |
||||
| Photo Etch Scissors | Xuron 9180ET - Professional Photo Etch Scissor | |
NM | |||
| Box-Joint Cutters - Side | Klein | |
Non-ferrous wires | GW | ||
| Tin Snips | Irwin Gilbow 200mm 8" | |
GW, MB | |||
| Straight Shears | - | |
GW | |||
| Micro Shear | Xuron 410T | |
||||
| Junior Hacksaw | Bahco 239 | |
GW, MB | |||
| Junior Hacksaw Blades | 32tpi Bahco 228-32-10P | |
||||
| Piercing Saw | Knew Concepts 3" 125.003 | |
GW, MB | |||
| Piercing Saw Blades | 0/0 | AW | ||||
| 1/0 | Razor Brand | |
GW | |||
| 2/0 | Vallorbe | |
IR | |||
| 4/0 | Razor Brand | |
AW, GW, IR | |||
| Vallorbe | |
|||||
| 5/0 | Razor Brand | |
GW | |||
| 6/0 | Razor Brand | |
AW, GW, IR | |||
| Vallorbe | |
|||||
| Beeswax | - | |
Lubricant | AW | ||
| Piercing Saw Peg | - | |
GW | |||
| Knife | 199 | Stanley | |
|||
| 99E | Stanley | |
||||
| Scalpel Handle (Small Fitment) | 3 | Swann-Morton | |
AW | ||
| 5 | Swann-Morton | |
GW | |||
| Scalpel Blades | 6 | Swann-Morton | - | |||
| 9 | Swann-Morton | - | ||||
| 10 | Swann-Morton | - | ||||
| 10A | Swann-Morton | |
AW, GW | |||
| 11 | Swann-Morton | |
GW | |||
| 11P | Swann-Morton | - | ||||
| 12 | Swann-Morton | - | ||||
| 12D | Swann-Morton | - | ||||
| 15 | Swann-Morton | |
GW | |||
| 15A | Swann-Morton | - | ||||
| 15T | Swann-Morton | - | ||||
| 16 | Swann-Morton | - | ||||
| Scalpel (Large Fitment) | 4 | Swann-Morton | |
|||
| Scalpel Blades | 23 | Swann-Morton | |
|||
| 25 | Swann-Morton | |||||
| 25A | Swann-Morton | |||||
| 26 | Swann-Morton | |||||
| Xacto | Handle Large No 2 | |
||||
| Blades No 202 | |
|||||
| 218 | |
|||||
| 3602 | |
|||||
| Single Edged Razor Blades | |
|||||
| Scrawker | |
|||||
| Circle Cutter | OLFA | |
||||
| Hard Surface | Hardboard Scraps | |
NM | |||
| Holes | ||||||
| Centre Punch | 1/16" (1.5mm) | Starrett 117AA | 05.04.20 |
|||
| 5/64" (2mm) | Starrett 117A | |||||
| 3/32" (2.5mm) | Starrett 117B | |||||
| 1/8" (3mm) | Starrett 117C | IR | ||||
| 5/32" (4mm) | Starrett 117D | |||||
| 1/4" (6.5mm) | Starrett 117E | |||||
| Auto | - | |
GW | |||
| Prick Punch | 60° | Starrett 816A | |
AW | ||
| Pin Vice | 0 - 1mm | Eclipse E121 | |
MB | ||
| 0.75 - 1.5mm | Eclipse E122 | |
||||
| 1.4 - 3.1mm | Eclipse E123 | |
||||
| 3.1 - 5mm | Eclipse E124 | |
||||
| 0.8-1.5mm | - | |
||||
| 1.3 - 3.1mm | - | |
||||
| Archimedean Drill (with Spring) | - | |
||||
| Drill Bits (Loose) | HSS 0.5mm (No. 76) | |
||||
| HSS 0.7mm (No. 70) | |
|||||
| HSS 1mm (No. 61) | |
|||||
| HSS 1.2mm | |
|||||
| HSS 1.5mm (No. 53) | |
AW | ||||
| HSS 2mm (No. 47) | |
|||||
| HSS 1/8" (3.18mm) | |
AW | ||||
| Drill Bit (Box) | HSS 0.3mm | Dormer Set 31M | |
AW | ||
| HSS 0.35mm | |
|||||
| HSS 0.38mm | |
|||||
| HSS 0.4mm | |
|||||
| HSS 0.45mm | |
|||||
| HSS 0.5mm | |
|||||
| HSS 0.52mm | |
|||||
| HSS 0.55mm | |
|||||
| HSS 0.58mm | |
|||||
| HSS 0.6mm | |
|||||
| HSS 0.65mm | |
|||||
| HSS 0.7mm | |
|||||
| HSS 0.75mm | |
|||||
| HSS 0.78mm | |
|||||
| HSS 0.8mm | |
|||||
| HSS 0.82mm | |
|||||
| HSS 0.85mm | |
|||||
| HSS 0.9mm | |
|||||
| HSS 0.95mm | |
|||||
| HSS 1mm | |
|||||
| Drill Bit (Tube) | HSS 1.5mm | Dormer Set 413 | |
|||
| HSS 2mm | |
|||||
| HSS 2.5mm | |
|||||
| HSS 3mm | |
|||||
| HSS 3.3mm | |
|||||
| HSS 3.5mm | |
|||||
| HSS 4mm | |
|||||
| HSS 4.2mm | |
|||||
| HSS 4.5mm | |
|||||
| HSS 5mm | |
|||||
| HSS 5.5mm | |
|||||
| HSS 6mm | |
|||||
| HSS 6.5mm | |
|||||
| Carbide Drill Bits | https://www.drill-service.co.uk/products/milling-cutters/standard-length-milling-cutters/sdc-carbide-slot-drill/ | JB | ||||
| Modelcraft 10 Pce Microbox Drill Set (0.5 - 2.2mm) | ||||||
| Modelcraft 20 Pce Microbox Drill Set (0.3 - 1.6mm) | ||||||
| Modelcraft 20 Pce Microbox Drill Set (No.61 - 80) | ||||||
| Cutting Broaches | 0.4-1.4mm | |
MB | |||
|
MB | |||||
| Reamers | ||||||
| Revolving Tool Holder | - | |||||
| Taps | 8BA Taper | |
||||
| 10BA Taper | |
Crankpins | AW | |||
| 12BA Taper | - | |
AW, MB | |||
| 13BA Taper | |
MB | ||||
| 14BA Taper | |
MB | ||||
| 10BA 2nd Taper | ? | GW | ||||
| Cutting Fluid | ||||||
| Screwdrivers | Parallel 1.0mm | Kennedy 11-Piece Set HQ-1101 | |
GW, IR | ||
| Parallel 1.2mm | ||||||
| Parallel 1.4mm | ||||||
| Parallel 1.8mm | ||||||
| Parallel 2.4mm | ||||||
| Parallel 3.0mm | ||||||
| Crosspoint PHO-4 | ||||||
| Crosspoint PHO-3 | ||||||
| Crosspoint PHO-2 | ||||||
| Crosspoint PHO | ||||||
| Crosspoint PH1 | ||||||
| Slotted 1.5mm x 40mm | Wiha PicoFinish 260P Precision Slotted / Phillips Screwdriver Set | |
||||
| Slotted 2mm x 40mm | ||||||
| Slotted 2.5mm x 50mm | ||||||
| Slotted 3mm x 50mm | ||||||
| Phillips PH00 x 40mm | ||||||
| Phillips PH0 x 50mm | ||||||
| Phillips PH1 x 60mm | ||||||
| Nut Spinners / Runners | 6BA | Markits | |
|||
| 8BA | |
|||||
| 10BA | |
|||||
| 12BA | |
|||||
| 14BA | |
|||||
| 16BA | |
|||||
| Carbide Drill Bits | https://www.drill-service.co.uk/products/milling-cutters/standard-length-milling-cutters/sdc-carbide-slot-drill/ | JB | ||||
| Drill Gauge | JB | |||||
| Filing | ||||||
| 150mm Files with tang | Barrette 15.5 x 3.5mm | Cut 0 | Vallorbe | Cousins UK | ||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Checkering 12.40 x 4.50mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Crochet 10.0 x 3.3mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Crossing 14.8 x 5.0mm | Medium Cut 2 | Vallorbe 999 477 | |
Cousins UK | ||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Flat | Cut 0 | Vallorbe 999 456 | ||||
| Cut 00 | Vallorbe 999 455 | |||||
| Cut 1 | Vallorbe 999 457 | |||||
| Cut 2 | Vallorbe 999 458 | |||||
| Cut 3 | Vallorbe 999 459 | |||||
| Fine Cut 4 | Vallorbe 999 460 | |
AW | |||
| Half Round, 15.30 x 4.70mm | Cut 0 | Vallorbe 999 436 | ||||
| Cut 00 | Vallorbe 999 435 | |||||
| Cut 1 | Vallorbe 999 437 | |||||
| Cut 2 | Vallorbe 156062 | IR | ||||
| Fine Cut 4 | Vallorbe | |||||
| Pillar, 12.00 x 4.00mm | Medium Cut 2 | Vallorbe 113262 | |
AW, IR, LG | ||
| Fine Cut 4 | Vallorbe 113264 | |
LG | |||
| Round | Medium Cut 2 | Vallorbe | |
|||
| Fine Cut 4 | Vallorbe 999 451 | |
||||
| Square | ||||||
| Three Square | ||||||
| 100mm Files with tang | Barrette, Safety Back 12.4 x 2.6mm | Medium Cut 2 | Vallorbe | Cousins UK | ||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Crochet 7.5 x 2.2mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Crossing 11.9 x 3.6mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| 90mm Files with tang | Crossing 10.2 x 2.9mm | Medium Cut 2 | Vallorbe | Cousins UK | ||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| 6" File Handle | - | |
||||
| Needle Files 200mm | Barrette, Safety Back 5.80 x 2.20mm | Cut 00 | Vallorbe | Cousins UK | ||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Crochet 6.5 x 1.5mm | Cut 0 | Vallorbe | Cousins UK | |||
| Crossing 6.0 x 2.4mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Half Round 6.3 x 2.0mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Knife-Edge 6.4 x 1.8mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Oval 4.4 x 2.9mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Pillar 6.5 x 1.3mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Pillar, Round Edges 6.5 x 1.5mm | Cut 0 | Vallorbe | Cousins UK | |||
| Round Maximum Ø3.5mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Square Maximum 2.8mm | Cut 00 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Triangular Maximum 4.4mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Cut 3 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Warding 6.5 x 1.4mm | Cut 00 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Needle Files 180mm | Barrette, Safety Back 5.4 x 2.0mm | Cut 0 | Vallorbe | Cousins UK | ||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Crossing 5.8 x 2.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Half Round 5.9 x 2.0mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Kife-Edge 6.0 x 1.7mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Oval 4.2 x 2.8mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Pillar 6.0 x 1.3mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Pillar, Round Edges 6.0 x 1.4mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Round Maximum Ø3.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Square Maximum 2.6mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Triangular Maximum 4.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Warding 6.0 x 1.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Needle Files 160mm | Barrette, Safety Back 5.1 x 1.8mm | Cut 00 | Vallorbe | Cousins UK | ||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Crochet 5.4 x 1.3mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | |
||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Crossing 5.1 x 2.0mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Cut 3 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Half-Round 5.6 x 1.7mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Half-Round, Cut On Back Only 5.6 x 1.8mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Joint 5.4 x 1.3mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Knife-Edge 5.4 x 1.5mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Oval 3.9 x 2.5mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Pillar 5.4 x 1.2mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe VLA2401-160-2 | Cousins UK | ||||
| Fine Cut 4 | Vallorbe VLA2401-160-4 | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe VLA2401-160-6 | Cousins UK | ||||
| Pillar, Round Edges 5.4 x 1.3mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Round Maximum Ø2.9mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe VLA2410-160-2 | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Slitting 6.1 x 2.1mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Square Maximum 2.4mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | AW | ||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Triangular Maximum 3.8mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Warding 5.4 x 1.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Cut 5 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Needle Files 140mm | Barrette | |||||
| Barrette / Safety Back 4.7 x 1.7mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | |
Cousins UK | |||
| Fine Cut 4 | Vallorbe | |
Cousins UK | |||
| Crochet 4.8 x 1.2mm | Medium Cut 2 | Vallorbe | |
Cousins UK | ||
| Crossing 4.4 x 1.8mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | |
Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Cut 5 | Vallorbe | Cousins UK | ||||
| Flat | Cut 0 | Vallorbe | ||||
| Medium Cut 2 | Vallorbe | |
||||
| Fine Cut 4 | Vallorbe | |||||
| Flat (Round Edge) | Cut 0 | Vallorbe | ||||
| Medium Cut 2 | Vallorbe | |
||||
| Fine Cut 4 | Vallorbe | |
AW | |||
| Half Round 5.1 x 1.5mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe VLA2402-140-2 | |
Cousins UK | |||
| Fine Cut 4 | Vallorbe | |
Cousins UK | AW | ||
| Half-Round, Cut On Back Only 5.1 x 1.5mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Joint 4.8 x 1.2mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Knife-Edge 5.0 x 1.4mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | |
Cousins UK | |||
| Cut 3 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Oval 3.5 x 2.4mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | |
Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Pillar 4.8 x 1.1mm | Cut 0 | Vallorbe VLA2401-140-0 | Cousins UK | |||
| Medium Cut 2 | Vallorbe VLA2401-140-2 | |
Cousins UK | |||
| Fine Cut 4 | Vallorbe VLA2401-140-4 | |
EI £11.30 | AW | ||
| Ultra Fine Cut 6 | Vallorbe VLA2401-140-6 | |
EI £16.40 | NM | ||
| Pillar, Round Edges 4.8 x 1.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Round Maximum Ø2.8mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe VLA2410-140-2 | |
Cousins UK | |||
| Cut 3 | Vallorbe - Obsolete? | Cousins UK | ||||
| Fine Cut 4 | Vallorbe VLA2410-140-4 | |
Cousins UK / EI £11.30 | AW | ||
| Slitting 5.5 x 1.9mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Square Maximum 2.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | |
Cousins UK | |||
| Cut 3 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe - Obsolete? | Cousins UK | AW | |||
| Triangular Maximum 3.5mm | Cut 00 | Vallorbe | Cousins UK | |||
| Cut 0 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | |
Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | AW, NM | |||
| Warding 4.8 x 1.1mm | Medium Cut 2 | Vallorbe | |
Cousins UK | ||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Needle Files 130mm | Contact Point 8.0 x 0.90mm | Cut 0 | Vallorbe | Cousins UK | ||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Needle Files 100mm | Barrette, Safety Back 3.7 x 1.4mm | Cut 0 | Vallorbe | Cousins UK | ||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Crochet 3.7 x 1.0mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Crossing 3.5 x 1.4mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe - Obsolete? | |||||
| Hall-Round 3.8 x 1.1mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Half-Round, Cut On Back Only 3.8 x 1.2mm | Cut 0 | Vallorbe | Cousins UK | |||
| Joint 3.8 x 1.0mm | Cut 3 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Knife-Edge 4.0 x 1.1mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Pillar 3.5 x 0.90mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Pillar, Round Edges 3.8 x 1.0mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Round, Maximum Ø2.1mm | Cut 0 | Vallorbe | Cousins UK | |||
| Cut 1 | Vallorbe | Cousins UK | ||||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Cut 3 | Vallorbe - Obsolete? | Cousins UK | ||||
| Fine Cut 4 | Vallorbe - Obsolete? | Cousins UK | ||||
| Round, Maximum Ø1.0mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Slitting 4.6 x 1.6mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Square Maximum 1.7mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Triangular Maximum 2.8mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Warding 3.4 x 0.9mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Needle File Handle | - | |||||
| Escapement Files 65mm | Pillar 5.0 x 1.3mm | Medium Cut 2 | Vallorbe | Cousins UK | ||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Round Maximum Ø2.0mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Cut 3 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Square Maximum 1.9mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Escapement Files 55mm | Barrette 4.5 x 1.3mm | Medium Cut 2 | Vallorbe | Cousins UK | ||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Barrette, Safety Back 4.5 x 1.3mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe - Obsolete? | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Crossing 4.8 x 1.6mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Equalling 4.7 x 0.7mm | Fine Cut 4 | Vallorbe | Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | |
Cousins UK - Cutting slots | AW | ||
| Half Round 4.6 x 1.6mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe 3008-55-6 | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Knife Edge/Pointed 5.0 x 1.3mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Pillar 5.0 x 0.9mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Round or Tapered (Rat Tail) Maximum Ø1.50mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | |
Cousins UK - Drifting holes sideways by in-and-out filing | AW | ||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Square Maximum 1.7mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Cut 3 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Cut 5 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | |
Cousins UK - Intricate tender frame cut-outs | AW | ||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Three Square / Triangular Maximum 3.4mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Warding 4.6 x 0.9mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Watch Anchor 4.4 x 0.8mm | Ultra Fine Cut 6 | Vallorbe | Cousins UK | |||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Escapement Files 48mm | Barrette, Parallel 4.1 x 1.2mm | Medium Cut 2 | Vallorbe | Cousins UK | ||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Escapement Files 40mm | Barrette, Safety Back 3.7 x 1.3mm | Cut 0 | Vallorbe | Cousins UK | ||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Crossing 3.7 x 1.4mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Half Round 3.8 x 1.4mm | Cut 0 | Vallorbe | Cousins UK | |||
| Medium Cut 2 | Vallorbe | Cousins UK | ||||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 8 | Vallorbe | Cousins UK | ||||
| Rounding Off 3.6 x 0.8mm | Medium Cut 2 | Vallorbe | Cousins UK | |||
| Fine Cut 4 | Vallorbe | Cousins UK | ||||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Triangular Maximum 2.8mm | Ultra Fine Cut 6 | Vallorbe | Cousins UK | |||
| Escapement Files 35mm | Balance Wheel 2.9 x 1.2mm | Fine Cut 4 | Vallorbe | Cousins UK | ||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Cut 10 | Vallorbe | Cousins UK | ||||
| Dovetail 3.0 x 1.0mm | Fine Cut 4 | Vallorbe | Cousins UK | |||
| Ultra Fine Cut 6 | Vallorbe | Cousins UK | ||||
| Sharpening Stones | Rectangular Combination, 101.6 x 25.4 x 12.7mm | Fine / Course India (320/100) | Norton 61463626001 | |
||
| Rectangular Combination, 152.4 x 50.8 x 25.4mm | Fine / Course India (320/100) | Norton 61463685560 | |
Blade Sharpening | AW | |
| Round, 101.6x6.35mm | Medium India (240) | Norton 61463686475 | ||||
| Fine India (320) | Norton 61463686470 | |
||||
| Square, 101.6 x 6.3 x.6.3mm | Medium India (240) | Norton 61463686070 | ||||
| Fine India (320) | Norton 61463686065 | |
||||
| Square, 101.6 x 12.7 x.12.7mm | Course India (100) | Norton 61463686105 | ||||
| Medium India (240) | Norton 61463686100 | |||||
| Fine India (320) | Norton 61463686095 | |||||
| Triangular, 101.6 x 6.3 x.6.3mm | Medium India (240) | Norton 61463686235 | ||||
| Fine Indian (320) | Norton 61463686230 | |
||||
| Triangular, 101.6 x 12.7 x.12.7mm | Course India (100) | Norton 61463686270 | ||||
| Medium India (240) | Norton 61463686265 | |||||
| Fine India (320) | Norton 61463686260 | |||||
| Sanding Files | 20mm | Coarse | Albion Alloys | |
||
| Medium | Albion Alloys | |
||||
| Fine | Albion Alloys | |
||||
| Extra Fine | Albion Alloys | |
||||
| 6mm | Coarse | Albion Alloys | ||||
| Medium | Albion Alloys | |||||
| Fine | Albion Alloys | |||||
| Extra Fine | Albion Alloys | |||||
| 3mm | Coarse | Albion Alloys | ||||
| Medium | Albion Alloys | |||||
| Fine | Albion Alloys | |||||
| Extra Fine | Albion Alloys | |||||
| Needles | Coarse | Albion Alloys | ||||
| Medium | Albion Alloys | |||||
| Fine | Albion Alloys | |||||
| Sanding Sticks | Grey 80 Grit | Excel 55711 | 03.04.20 |
|||
| Red 120 Grit | Excel 55712 | 03.04.20 |
||||
| Blue 240 Grit | Excel 55713 | 03.04.20 |
||||
| Green 320 Grit | Excel 55714 | 03.04.20 |
||||
| Yellow 400 Grit | Excel 55715 | 03.04.20 |
||||
| Black 600 Grit | Excel 55716 | 03.04.20 |
||||
| Forming | ||||||
| Pliers | Snipe | Unknown | |
AW, GW, IR | ||
| Lindstrom Supreme 7890 | |
Heamar | ||||
| Lindstrom Supreme 7893 | |
Heamar | ||||
| Flat | Klein | |
AW. GW, IR | |||
| Lindstrom Supreme 7490 | |
|||||
| Watchmaker's Round | Lindstrom Supreme 7590 | |
Heamar | AW, GW, IR | ||
| Round Nose (Larger) | |
GW | ||||
| Bending Pliers (Mini) | Tamiya 84 (74084) | |
||||
| Cutters | Cutter Micro Bevel | Lindstrom Supreme 7190 | - | 0.2mm - 1.0mm of copper wire Heamar | AW | |
| Cutter Flush | Klein | |
||||
| Lindstrom Supreme 7191 | |
0.1mm - 1.0mm of copper wire Heamar | ||||
| Oblique Cutter | Klein | |
||||
| Lindstrom Supreme 7290 | |
0.35mm - 1.25mm of copper wire Heamar | ||||
| Parallel Jaw Pliers | Flat 140mm | Maun 4870-140 | |
NM | ||
| Flat 160mm | Maun 4860-160 | - | ||||
| Snipe 125mm | Maun 4340-125 | |
||||
| Micro-Shear Flush Cutter | Xuron 410 | |
Soft wire up to 18AWG (1.02mm) | |||
| Maxi Shear Flush Cutter | Xuron 2175 | |
Any differenct with Xuron 2175B "Track Cutters"? | |||
| Music Wire Shear Cutter | Xuron 2193 | |
AW | |||
| Wire Stripper | Xuron 501 | |
||||
| Heavy Pliers | Knipex KPX0306180 Combination Pliers 180mm VDE Grips | |
AW | |||
| Chasing Hammer | |
|||||
| Rawhide Hammer | - | |
GW | |||
| Anvil | |
|||||
| Small Shop Hold and Fold® | 2" Mini | SMS001 | ||||
| The Bug | SMS002 | |
||||
| 4" | SMS003 | |||||
| 5.5" The 5 Speed | SMS004 | |||||
| 8" Multi-Head | SMS005 | |
||||
| Preparing | ||||||
| Wet & Dry | Various Grades | GW | ||||
| Some stuck to flat boards | ||||||
| Holding | ||||||
| Bench Vice | Panvise 381 (Vacuum Base) | |
(GW - 2.25inch jaws) | GW | ||
| Dinky Hair Grips | |
|||||
| Watchmakers Vice | - | |
||||
| 3in Vice Cheeks | |
|||||
| 9in Bending Bars | |
|||||
| Toolmakers Parallel Clamps | 2" | - | |
|||
| Hand Vice | Brass | - | |
GW | ||
| Locking Forceps | Straight Smooth | - | |
|||
| Straight Serrated | - | |
||||
| Curved Serrated | - | |
||||
| Tweezers | AA Long General | Klein Professional | M |
AW | ||
| SS Long Thing | ||||||
| 2 Tapered | ||||||
| 3C Short General | ||||||
| 5A Offset | ||||||
| 7 Curved | ||||||
| 27 General | ||||||
| #2A | Klein Professional | M |
||||
| ESD Tweezers | 115 mm Point Type Curved; Pointed | Bernstein 115 mm, Anti-Magnetic Stainless Steel, Curved; Pointed, ESD Anti-Acid Solder Resistant Tweezers | |
|||
| Nylon Hobby Clamps | - | |
||||
| Ground Angle Plates x 2 | Axminster £17.60 each |
JB | ||||
| Vee Blocks | Sort of 1" square... Proxxon 24262 | GW, JB | ||||
| Aluminium Mini Clips | ||||||
| Soldering | ||||||
| Soldering Iron | 15W | Antex C15 | - | IR | ||
| 18W | Antex CS18 | |
GW | |||
| 25W | Antex XS25 | |
GW, IR | |||
| 15W Soldering Iron Tips | 106 1.0mm Bit | Antrex B010660 | ||||
| 102 2.3mm Bit | Antrex B010260 | |||||
| 18W Soldering Iron Tips | 1107 0.12mm Unplated Bit | Antex B110770 | - | |||
| 1106 1.0mm Bit | Antex B110660 | |
||||
| 1100 2.3mm Bit | Antex B110060 | |
||||
| 25W Soldering Iron Tips | 57 0.12mm Unplated Bit | Antex B005770 | ||||
| 55 0.5mm Bit | Antex B005560 | |
||||
| 56 1.0mm Bit | Antex B005660 | |
||||
| 50 2.3mm Bit | Antex B005060 | |||||
| 54 3.0mm Bit | Antex B005460 | |||||
| 52 4.7mm Bit | Antex B005460 | |||||
| Soldering Iron Stand | ST4 Stand | Antex H400020 | GW | |||
| Soldering Iron | RDS Digital Soldering Staton 80W | ERSA | |
|||
| Soldering Iron Tips | 2.2mm Straight Chisel (832 CD) | ERSA | |
|||
| 5mm Chisel (832 VD) | ERSA | |
||||
| 5mm Bent Chisel (832 RD) | ERSA | |
||||
| 0.4mm Straight Conical (832 UDLF) | ERSA | |
||||
| 1mm Conical (832 BD) | ERSA | |
||||
| 2mm | ||||||
| Tip Cleaner | Xytronic 460 Brass Wool Solder Tip Cleaner | |
NM | |||
| Gas Soldering Iron | SolderPro 120 30-125W | |
||||
| Resistance Soldering Iron | London Road Models | |
||||
| Deep Pot Magnets | 10mm dia. x 20mm | Eclipse Magnetics E752/NEO/C | x6 |
|||
| Soldering Scrap Wood / Balsa | ||||||
| Flux Bottle | Pro'sKit MS-035 | |
||||
| Flux | Red | Carr's Red Label | Whitemetal, Brass, Nickel Silver and Pewter | |||
| Black | Carr's Black Label | Steel, Nickel Silver & Brass equivalent to Bakers Fluid | ||||
| Green | Carr's Green Label | Steel, Brass, Nickel Silver & Copper | ||||
| Yellow | Carr's Yellow Label | Whitemetal, Brass, Nickel Silver & Pewter | ||||
| Orange | Carr's Orange Label | Electrical | ||||
| Brown | Carr's Brown Label | Stainless Steel | ||||
| 9% Phosphoric Acid | ||||||
| 12% Phosphoric Acid | Eileen's Emporium | |
IR | |||
| Safety Flux | Building O Gauge Online SOL001 | |||||
| Paste Flux | Fry's Power Flo Paste Flux | |
||||
| Paste Pots | For Liquid Flux | GW | ||||
| Solder Wire | 70°C | Carr's C1001 | |
Whitemetal Castings | ||
| 73°C | Churchward Models | Whitemetal Kits | ||||
| 100°C | Carr's C1044 | |||||
| 145°C | Carr's C1002 | |
IR | |||
| Churchward Models | ||||||
| Eileen's Emporium | |
|||||
| 179°C | Carr's C1003 | |
||||
| 188°C | Carr's C1004 | |
||||
| Churchward Models | ||||||
| 221°C | Carr's C1000 | |||||
| 243°C | Carr's C1006 | |||||
| Solder Wire 60/40 18SWG | NM | |||||
| Solder Wire 60/40 22SWG | ||||||
| Solder Paint / Paste | 188ºC | Carr's | |
Resistance Soldering | ||
| Eileen's Emporium C1040 | - | |||||
| Solder Cream | 138°C | Carr's C1017 | |
Resistance Soldering | ||
| 179°C | Carr's C1016 | |
Resistance Soldering | |||
| Neutralising Rinse | Carr's | |
Removes flux residues | |||
| Soldering Iron Tip Tinner / Cleaner | Eileen's Emporium | |||||
| Bitloose | Carr's | Soldering Iron Bits | ||||
| Scraper | (Old Screwdriver) | |||||
| Glueing Adhesives & Solvents | ||||||
| Epoxy | Araldite DIY Rapid | |
||||
| Araldite Standard Extra Strong | |
|||||
| Devcon 5 Minute Epoxy (Twin Tube) | |
GW | ||||
| Cyanoacrylate Super Glue |
Zap a Gap Medium | |
||||
| Deluxe Materials Roket Hot | |
Super-thin, fast, penetrating adhesive; sets 1-5 sec. | ||||
| Deluxe Materials Roket Rapid | |
Medium viscosity, fast setting adhesive; sets 5-10 sec. | ||||
| Deluxe Materials Roket Max | |
Thick, maximum gap-filling adhesive; sets 10-20 sec. | ||||
| Deluxe Materials Roket Odourless | |
Thick, maximum gap-filling adhesive; sets 10-20 sec. | ||||
| Deluxe Materials Roket Cyano Glue Gel | |
Fast 10 second bond, non runny, fills gaps. |
||||
| Loctite 496 | |
Metal to metal. | ||||
| Liquid Poly Plastic Cement |
MEK / Butanone | |||||
| Deluxe Materials Plastic Magic | |
|||||
| Deluxe Materials Roket Plastic Glue | |
Liquid Plastic cement. | ||||
| Misc. | Balsa Cement | GW | ||||
| Canopy Glue | |
JB | ||||
| Deluxe Materials Glue 'n' Glaze | |
For making crystal clear windows and bonding canopies and most plastics |
||||
| Deluxe Materials Glue Buster | |
|||||
| Deluxe Materials Roket Card Glue | |
For fast assembly of card models eg. railway buildings and rockets. |
||||
| Deluxe Materials Super 'Phatic | |
|||||
| Deluxe Materials Tacky Wax | |
|||||
| Deluxe Materials Micro Tips & Tube | |
|||||
| Evo Stik Impact Adhesive | |
GW | ||||
| Loctite 601 | Plastic to steel | GW | ||||
| Microbrush Applicators | https://www.scalemodelshop.co.uk/product/25pk-microbrush-white-cylinder | JB | ||||
| Cleaning | ||||||
| Metal Cleaners | Carrs? | GW | ||||
| Shaving Brush | Badger | Dusting | GW | |||
| Suede Brush | GW | |||||
| Glass Fibre Scratch Brush | GW | |||||
| Brass Scratch Brush | ||||||
| 2.5inch Flat Brush | Cleaning workspace | GW | ||||
| Abrasive Blocks | Extra Coarse (36 Grit) - Wine | Garryflex | ||||
| Course (60 Grit) - Blue | Garryflex | |
||||
| Medium (120 Grit) - Grey | Garryflex | |
||||
| Fine (240 Grit) - Brown | Garryflex | |
NM | |||
| Hotions & Potions | ||||||
| Cocktail Sticks | ||||||
| Loctite 242 | ||||||
| For plastic etc. | ||||||
| Fillers | Deluxe Materials Perfect Plastic Putty | |
One-part, fast-drying, superfine filler with good adhesion and sanding properties on plastic. | |||
| Squadron Green Putty | |
|||||
| Squadron White Putty | |
|||||
| Oil | Clock - top quality | GW | ||||
| Sewing Machine | ||||||
| Grease | Carr's Micro Grease | |
Worm gears | |||
| Birchwood Casey Super Blue | |
|||||
| Micro Krystal Klear | |
|||||
| Painting | ||||||
| Brush Cleaner | Deluxe Materials Brush Cleaner | |
||||
| Paint Stripper | Deluxe Materials Strip Magic | |
||||
| Brushes Nylon type sable substitute | 2 | |
GW | |||
| 1 | |
GW | ||||
| 0 | |
GW | ||||
| 1/8in | |
GW | ||||
| flat? | |
GW | ||||
| Metal Black Fluids | GW | |||||
| Cellulose Spray | Matt Black | GW | ||||
| Satin Black | GW | |||||
| Palattes | For paint and thinners | GW | ||||
| Misc... | ||||||
| Safety Glasses | Uvex I-VO Clear Safety Glasses (9160265) | |
GD | |||
| Working Boards | Tufnol | |
GW | |||
| A3 Cutting Mat | ||||||
| Cotton Buds? | ||||||
| Balsa Offcuts | ||||||
| Clothes Pegs | ||||||
| Miniature Spring Clamps | ||||||
| Masking Tape | ||||||
| Gravity Rivetter | ||||||
| Pins / Wire | ||||||
| Sheet Lead | 6" x 6" x 3.0mm | |||||
| Jigs | ||||||
| Chassis Assembly Jig | ||||||
| Riveting Tool | Universal Rivet Tool - which one? | GW Models | |
GW | ||
| Electronics | ||||||
| Anti Static Wrist Strap | 1M ohm resistor Multicomp DY7010-L-C06 | |||||
- AW - A Basic Tool Kit for 2mm Modelling
- GW - Guy Williams
- JB - Jack Burgess
- MB - Mike Bryant "A Loco Builder's Tool Box"
- NM - A Jubilee For A Jubilee
Space for nuts, bolts, washers, rod / tube, sheet metal?
Additional "Modules"
-
| Proxxon Mini Drill | ||||
|---|---|---|---|---|
| Drill | Proxxon Micromot MM 50(E) | GW | ||
| Drill Stand | MB 140/S | GW | ||
| Flexible Shaft | 110/BF | GW | ||
| Tools | GW | |||
| Burrs | ||||
| Disc Cutters | ||||
| Lighting | ||||
| Anglepoise (60W) | |
GW | ||
| Daylight Omega 7 Magnifying Lamp | |
|||
| Daylight D62001 5 Diopter Lens | |
|||
| Daylight D62001 5 Diopter Lens | |
|||
| Daylight Company Triple Bright Table Lamp D32500 3 Energy Saving Tubes... looks like a Lightcraft Triple Tube Professional Task Lamp? | |
|||
Bahco 474 Cabinet Scraper 150mm x 62mm x 0.8mm AW
Possible tools?
- Tamiya 74024 Craft-Tools Thin Blade Craft Saw
- Tamiya 74031 Craft-Tools Decal Scissors
- Tamiya 74067 Craft-Tools Bending Pliers For Photo Etched Parts
- Tamiya 74078 Craft-Tools Model Cleaning Brush (Anti-static)
- Tamiya 74084 Craft-Tools Bending Pliers Mini (For Photo Etched Parts)
- Tamiya 74091 Craft-Tools Plastic Scribber II
4mm Coal Wagon, A Step By Step Guide - John Hayes The 4mm Wagon Part One - Geoff Kent The 4mm Wagon Part Three - Geoff Kent The 4mm Wagon Part Two - Geoff Kent. Locomotive Kit Chassis Construction In 4mm. 4mm Engine 2. Iain Rice Modelling With Plastic Structure Kits. Iain Rice Whitemetal Locos - Iain Rice. Etched Loco Construction. Laurie Griffin. Whitemetal Loco
Iain Rice
Bibliography
- Bryant, M. (1978). A Loco Builder's Tool Kit. The 2mm Magazine, pp.7.
- Holt, G. (2012). Locomotive Modelling From Scratch and Etched Kits Part One. Didcot: Wild Swan Publications Limited, pp.
- Holt, G. (2013). Locomotive Modelling From Scratch And Etched Kits Part Two. Didcot: Wild Swan Publications Limited, pp.
- Rice, I. (1993). Locomotive Kit Chassis Construction In 4mm. Didcot: Wild Swan, pp.33-35.
- Rice, I. (2002). La Boîte des Manèges. Scalefour News, (126), pp.4-5.
- Rice, I. (2002). La Boîte des Manèges - 2. Scalefour News, (127), pp.12.
- TSG Media (2018) Model Railroading With Jack Burgess Ep. 1 Get Organized. Available at: https://www.youtube.com/watch?v=e2eEnMaQnfY (Accessed: 5 February 2020).
- Webster, A. (1999). Files and the 2mm Modeller Part One. The 2mm Magazine, pp.74-77.
- Webster, A. (2000). Files and the 2mm Modeller Part Two. The 2mm Magazine, pp.7-9.
- Webster, A. (2001). A Basic Tool Kit for 2mm Modelling. The 2mm Magazine, pp.100-104.
- Webster, A. (2002). How to Obtain Tools. The 2mm Magazine, pp.20-23.
- Webster, A. (2003). Modelling on the Move. The 2mm Magazine, pp.24-25.
- Webster, A. (2004). Travelling Tool Kit. The 2mm Magazine, pp.47-49.
- Webster, A. (2005). Resharpening Hobby Knives. The 2mm Magazine, pp.4-6.
- Webster, A. (2005). Sanding Sticks and Sanding Boards. The 2mm Magazine, pp.53-54.
- Webster, A. (2005). Selecting Maintaining and Rehabilitating. The 2mm Magazine, pp.103-106.
- Williams, R. (1988). The 4mm Engine A Scratchbuilder's Guide. Didcot: Wild Swan Publications Limited, pp.7-10.